Wooden Flooring installation cost 2021 (2023)

Wood flooring looks great in any home and doesn’t have to break the budget either. Find out how much wood flooring costs here.

Wooden Flooring installation cost 2021 (1)

in this article

Wood flooring cost

Wood flooring cost depends on the cost of material and labor work required. The price can vary significantly depending on the type of wood and finish, plank sizes, and the sub-layer of your floor.

Hardwood planks can cost from £19 – £109 per square meter. Engineered wood is usually slightly less expensive and costs from £20 – £50 per square meter. Wood effect laminate prices start from £20. Adding insulation increases the cost from £8 to £27 per meter.

The flooring installer will usually charge £12 to £25 per square meter to install the planks alone. Adding insulation increases the labor cost by £7,5 to £15 per square meter.

Wooden Flooring installation cost 2021 (2)
Below you can see the cost of different materials for a 16m2 room in a newly built home. In the cost are included all labor, materials and also estimations on breakage and wastage.

Flooring Materials Cost Comparison
Flooring typePC sum allowance per m2Flooring onlyAdditional materialsLabourTotal cost
Solid wood£45£720£271£276£1,312
Engineered wood£30£480£191£276£977
Wood effect laminate£20£320£149£276£765

Note: who should use the following example only to compare material costs. Original data provided by Build.com

Wood Flooring Installation Labour Cost Per m2

The following table focus on how different materials slightly influence the installation cost.

Type of flooringApproximate installation cost (per m2)
Solid wood floor, pre-finished, glued, or nailed down£12.00-£25.00
Engineered wood floor, pre-finished, floated£11.00-£23.00
Engineered wood floor, pre-finished, glued, or nailed down£17.00-£24.00
Unfinished wood floor (solid or engineered), including sanding, lacquering, or oiling£19.00-£29.00

Benefits of wood flooring

Most people choose a wooden floor because of its aesthetic appeal – there is a broad range of wood types and colorings available to suit any taste. Another major benefit of wood is that it is an eco-friendly, natural, and sustainable resource that is very hard-wearing.

In fact, if maintained well, a hardwood floor could last a lifetime and is attractive to home buyers – a survey by woodflooring.org found that 58% of estate agents questioned said homes with wooden floors are more profitable than ones without.

Wood is also a hygienic flooring choice; according to the Environment, Health and Safety Online, nearly 100,000 dust mites live in a square yard of carpet, which can irritate allergies and respiratory conditions like asthma. A wood floor, however, is easier to clean and keep dust-free.

Different Types of Wood Flooring

There are many types of wood, but hardwoods like oak, walnut, and maple are the most popular. Softwoods like pine can be used but are less durable. However, you might choose to use softwood to match your existing floors (typical in Victorian Homes) or if you are restoring original floors.

You can pick from different plank lengths and widths and different finishes such as oil, wax, stain, or varnish. The most important thing is to be sure of where you are putting the floor and what you want to achieve.

While wooden floors are suitable for any home, high traffic areas like hallways need tough, dense boards, and you should avoid using them in bathrooms as they can warp from damp. Installing engineered wood for wet rooms is more practical instead, added experts from Direct Flooring Online.

Laminate flooring

Laminate flooring is a piece of MDF with a photographic image of wood grain adhered to the surface. It is also the cheapest version of a wooden floor.


    • Cheaper than hardwood and carpet.
    • Laminate flooring is sold in a wide variety of wood, stone, and tile finishes.
    • Easy to install.
    • Easy to clean and maintain.
    • Resistant to stains, impacts, and scratches.
    • Ideal for people that suffer from dust allergies.
    • Environmentally friendly.


    • Requires the use of a special laminate flooring cleaner.
    • Do not tolerate standing pools of water and heavy moisture.
    • Laminate wood planks are tough to repair.
    • Proper installation takes some skill to achieve a great-looking floor.
    • It does not give a very high resale value

Price range: £ 5 – £15 per square meter

Engineered wood flooring

Engineered wood flooring, often called composite wood flooring, is made from wood fibers and other materials that are glued together to form a solid layer that is strong and durable.


    • Great looks! Looks like real wood.
    • Easy to install.
    • Engineered wood expands and contracts less than solid wood.
    • Suitable for wet areas such as bathrooms and laundry.
    • It is very durable and ideal for heavy footfall in both domestic and commercial environments.
    • It can be sanded, which allows it to be repaired and refinished.
    • Comes available in wider boards than solid wood flooring.


    • Quality of materials used in production (depends on manufacturer).
    • Limited style options.
    • Health issues can be caused by the adhesives used to bond the layers of the engineered flooring.

Engineered Wood Flooring Costs

Wooden Flooring installation cost 2021 (3)

Engineered Wood TypeMaterial Cost Per Square MetreLabor Cost Per Square Metre
Basic£19 – £39£12 – £22
Mid£40 – £69£12 – £22
High£70 – £109£12 – £22

When you’re considering installing a new wooden floor on your property, you may want to choose an engineered rather than a traditional solid wood floor. Engineered wood comprises a series of layers of real hardwood pressed together on top of plywood, providing extra strength and the appearance of solid wood.

Low: Basic engineered wood flooring material comes with three core layers, and on the top, a layer of wood veneer of 1/16- to 1/12-inch thick. It costs on average between £19 – £39 per square meter, with installation costs running between £12 – £22 per square meter, depending on the complexity of the layout.

Mid: If you are looking for an upgraded version with thicker veneer and five-layers core, expect to pay from £40-£69 per square meter, with installation costs running £12 – £22 per m2.

HIgh: If you are looking for top quality engineered hardwood products, you should expect to pay from £70 – £109 per square meter, with installation costs running £12 – £22 per m2. Luxury engineered hardwood products have seven or more core layers with a top veneer of about 1/6-thick.

Hardwood Flooring

Hardwood flooring is without a doubt one of the most beautiful flooring options out there. After years of use, it gets better looking with age and can be refinished for a brand new look. As for installation procedures, hardwood is a time-consuming one.

You’ll need to prep the floor, install the hardwood, then go through an extended series of sanding, buffing, treating, and varnishing steps before the floor can be used. But before any of this, you’ll need to store all of the new planks in your home for a few days (maybe even a couple of weeks) before the install. The wood needs time to acclimate to the humidity in the home before being put down.


    • Straight-forward installation for those with the right experience.
    • Hardwood floors are easy to clean (they do not accumulate dirt, dust, and debris).
    • The Combine high-end aesthetic and style.
    • High-quality hardwood floors are very durable and long-lasting when manufactured, installed, and finished to certain standards.
    • Hardwood flooring increases the value of the property in the long term.
    • Hardwood floors come in a wide variety of colors and styles.
    • A great choice for allergy sufferers and healthy indoor air quality.


    • High cost of installation, deriving from the quality of materials and the expertise of installation.
    • They do not absorb heat, light, and noise easily.
    • Solid wood floors occasionally need refinishing as they are very easy to scratch.

Hardwood Flooring Cost

Hardwood TypeLowHigh
Low Grade£25£49
Mid Grade£50£65
High Grade£80£120

Hardwood flooring costs most homeowners between £1,580 and £3,700 for a 16m2 room in the United Kingdom, including material and labor. On average, expect to pay around £2,800 per room. Hardwood flooring installation per square meter ranges from £50 to £65 per square meter (including materials).

While it is certainly not the cheapest option, hardwood flooring is one of the most popular options for its classic and warm appearance, durability, and versatility. Furthermore, wood flooring increases the resale value of a property and makes any space look more appealing.

Hardwood floor installation cost
Average Cost£2,800
Typical Range£1,580 and £3,700

It is important to understand the various factors that will affect the final cost of your project. Whether you choose traditional hardwood material or engineered hardwood flooring, you need to find a solution that works best for you and your home. Types of hardwood flooring for those who have pets, hardwood floors might not be the best choice; however, if you are looking for solid wood, be aware that some hardwood floors are more durable than others.

To keep the wood from permanent damage, clean up any liquids immediately. Hardwood flooring isn’t necessarily one solid piece of building material. It is usually made up of dozens of various kinds of trees, with each having a different price, color, and durability.

In terms of your choices for hardwood flooring, below are some of the most popular available on the market, along with their unique features:

Wooden Flooring installation cost 2021 (4)

Maple: Ideal for high-traffic locations because it is tough and dent-resistant; it ranges in color from creamy white to pale red and can be challenging to work with

Pine: Color ranges from light beige to rich golden amber; this wood consists of warm tones and rustic knot designs and is easily scratched or dented

Bamboo: Comes in many different colors and includes interesting striations; floors made of bamboo strands are the hardest and most durable available

White ash: A durable wood with visible knots that is difficult to stain. It ranges in color from light tan to pale gray.

Hickory: Wide array of colors with remarkable grain designs; ideal for high-traffic locations due to its high density

Red oak: Compact but visible grain with a reddish color; the majority of dark oaks appear to glow in direct light producing a warm atmosphere

Brazilian walnut: A tough and durable exotic hardwood that comes in a wide array of browns; ideal for pet owners as the surface is scratch-resistant wood flooring prices vary depending on the type chosen, and in the case of solid wood, the wood chosen and the thickness.

Other costs to Include

Wood floor installation also involves several other tasks that you can complete rather than the professional tradesman you will hire if you are looking to save any money.

Carpet Removal and Disposal: £2 – £3 per square meter

Skirting Installation: £5 per meter

Beading: £5 per meter

Door Trimming: £30 – £70 per door

Floor Board Replacement: £20 per meter (labor and materials)

Floor Levelling: £15 – £20 per square meter (labor + screeding material)

Furniture Relocation: £25 – £30 per hour

Hardwood floor installation cost per m2

The cost of hardwood floor installation starts from £22 per square meter and can go up to £60, depending on the specifics of your home. The average cost for materials for a middle-sized room is about £400. To get a clear picture of the installation costs, we encourage you to request as many quotes as possible from local experts. Make sure to submit detailed project specifications and have the experts visit your home to examine the space in detail before making an offer. How much extra hardwood floor to orderBefore ordering hardwood floor, consult with the professional you hired about how much hardwood floor supply you need to cover your floor space.

Usually, who will advise you to order an additional 5%-15% for filling in gaps and awkward spaces? However, according to our experience, ordering 10% – 15% additional supply ensures that there will be no delay in the project if you run out of material. It will also help save money by avoiding paying the installers extra money for the working hours or days until the new supplies arrive.

Additional factors to consider

Carpet removal and disposal

Before installing a new wooden floor, you will need to clear the room, pull up the old carpet, and dispose of it. This is not a very difficult job, so if you are looking to save money, this is a good way to start. However, if you do not feel like doing it yourself, you can always hire a carpet removal company to remove and dispose of your unwanted carpet safely and efficiently. They will remove the old carpet along with tack strips, glue, and stapled-down padding used when first fitted the carpet in the room. Remove existing skirting boards. When the wooden flooring is installed, the existing skirting needs to be removed and then thrown away.

Only after the existing skirting has been removed can the floorboards be laid all across the room, the new skirting can be applied, and the threshold strips can be attached directly to the wall. Again this is a job that you can do if you want to save money. Install underlay if you are trying to cut down the cost; installing the underlay yourself can certainly help. The floor needs to be level before the wooden floorboards can be laid.

On concrete foundations, you can use either a self-leveling compound or a damp-proof membrane. On different foundations, you simply use foam underlay, which is also easy to roll out and cut to shape. Always allow a few days for the room to settle before fitting the flooring.

Underlay costs

The cost of flooring underlay is mostly related to the type of subfloor:

    • Concrete subfloor: £2.00 per m² – £4.25 per m²
    • Wooden subfloor: £1.75 per m² – £3.75 per m²

The thickness of the underlay ranges from 2mm to 5.5 mm and depends on its function. For instance, different underlay is required when underfloor heating than when you need to combat dampness.ExtrasWhen you are looking at the wooden flooring installation cost in your home; a solid wood floor can be stained or have a colored finish. It can be left raw and sealed to give a natural warm feeling to a room or stained to match other decor and floor coverings.

A hardwood floor installation cost will include a sealer for the timber, and you will need to remember that that floor will be unable to be walked on for a few days. This floor does come with a 10 to 15-year guarantee to ensure that you have made a good investment in your home.

Keeping costs low by buying and bringing the wood flooring home on your own is one way to save on your budget. The only thing the contractor has to do is the actual installation. Do you want intricate details like inlaid designs or borders? This will cost you more. Save £0,8 to £1,5 per sq. ft. in installation costs when you have a simple layout. Additional ways to reduce costs include:

    • Comparing prices: When you come across a type of wood, color, and style to suit your needs, look at similar kinds online, at discount flooring stores, and at local retailers to find the best possible price.
    • Obtaining a few quotes: How much will the actual installation cost? Always get at least three quotes for installation from contractors who are licensed and insured. You can then make an informed decision.
    • Minimizing labor costs: Taking out and disposing of the old flooring and having the room clear of furniture etc., will reduce costs as contractors usually charge extra for this kind of service.

DIY considerations & risks

You decided to install hardwood flooring; you need to remember that a DIY project will only apply to some hardwood flooring. A hardwood that has to be glued or nailed down requires specialized equipment, materials, and operating on a subfloor. Use the following steps to install hardwood flooring that has click and lock:

    • Glue together. On the tongue of every board, apply a bead of glue and tap into position.
    • Fasten it—secure boards, to current flooring with a rental compressor and floor stapler.
    • Glue down. Similar to tiling, place boards on the glue.
    • Click and lock. The tongues and grooves click to each other. It’s fast and tidy.

Sanding or finishing is not required to install prefinished floors, which makes them ideal for DIY projects. If there are issues, you are covered by a 20-year warranty; therefore, you can get assistance without paying outlandish fees. The downside is that these floors can’t be sanded as often, making them challenging to maintain.

There are many risks involved if you don’t have a floating floor that is clicked and lock; therefore, installing it on your own isn’t recommended. DIY installation isn’t recommended for glue-down or nailed-down hardwood floors due to the mess involved.

Putting nails in the wrong spot is also a great possibility, which might result in the flooring bulging, moving too much, or placing the slats in the wrong spot between planks. If there is a concrete subfloor, installing a glue-down or nail-down floor isn’t a good idea. Additional factors that might make a DIY installation risky include:

  • Room Design: Rooms with irregular shapes are challenging when installing straight planks, given that you will only be able to cut them once. Therefore, if it isn’t long enough, placing a piece back will make the job look awful.
  • Budget: Although a DIY installation might save you money, shelling out hundreds for repairs after a bad installation isn’t worth it. The best way to save money is to replace a floor due to cracking or bulging from humidity.

Although you want to do your own DIY installation on your floor, click and lock flooring requires specialized skills, and what you save initially, you might have to pay even more in repairs down the road. Contact a flooring expert for professional advice once you have a budget and know what kind of floor you want to install. One option to save money is to serve as a helper to the contractor.



Build Cost Basics: Guide to Internal Flooring Prices

Related Articles

  • Five Ways to Cut Bathroom Renovation Costs
  • Attic Ceiling Insulation


What is the average labor cost to install wood flooring? ›

Average Hardwood Flooring Cost. The average cost of installing hardwood floors is $3–$10 per square foot for materials and $3–$8 per square foot for labor, totaling $6–$18 per square foot.

How much does it cost to install 1000 square feet of hardwood floors DIY? ›

On average, it can cost anywhere from $12 to $22 per square foot to install hardwood flooring, with the national average cost hovering around $11 to $12 per square foot. To install 1,000 square feet of hardwood flooring, you can expect to pay between $12,000 and $22,000 dollars.

How much does it cost to install 500 square feet of hardwood floors? ›

Room Size
Amount of FlooringTypical Cost Range
500 sq. ft.$3,000 – $6,000
1,000 sq. ft.$6,000 – $12,000
1,200 sq. ft.$7,200 – $14,400
2,000 sq. ft.$12,000 – $24,000
Mar 20, 2023

How much do most contractors charge to lay flooring? ›

Flooring installation can cost anywhere from $2 to $20 per square foot of flooring installed, or $1,000 to $10,000 for 500 square feet of flooring. The national average flooring installation cost is around $7 per square foot or $3,500 per 500 square feet, which includes the cost of both materials and labor.

How much is labor for plywood subfloor installation? ›

Labor. The labor fees to install subflooring are usually between $25 and $30 per hour, but may vary based on your location and whether the job is straightforward or complex. Additional work—like removing existing flooring and subflooring, hauling old materials, or preparing a surface—costs extra.

How do you estimate wood flooring? ›

To do so, use a tape measure to determine the room's length and width. Then multiply the length by the width to get your square footage. For instance, if the room is 12 feet wide and 12 feet long, you will need enough flooring for 144 square feet (12×12=144).

How long does it take to install 400 square feet of hardwood floors? ›

7 days for the wood to acclimate before installation can begin, typically 2 to 3 days to actually install your hardwood flooring, and another 4 to 5 days to finish it. This time frame is based on the premise that a two-person team is capable of installing between 400 and 700 sq/ft of hardwood per workday.

How much does it cost to install 1600 square feet of hardwood floors? ›

Hardwood flooring prices:
Total square footageWood flooring cost per square foot (installed)
3 more rows
May 10, 2022

Is it cheaper to install hardwood floors yourself? ›

When installing your own floors, you only have to pay the cost of materials and tools or tool rental. Because you're not paying for the quality and craftsmanship of specialized labor, these costs are considerably less than what you would pay for professional installation.

How long does it take to install 500 square feet of hardwood floors? ›

Typically, installation of hardwood floor takes anywhere from 1 to 3 days. The average job size ranges from 1000 to 5000 square feet. A two-person team of installers is typically able to complete 750 to 1000 square feet of flooring each day.

How much does it cost to install 1000 square feet of vinyl plank flooring? ›

The average cost to install 1,000 square feet of vinyl flooring is between $2,000 and $7,000 for standard vinyl planks and between $3,000 and $10,000 for luxury vinyl planks. Adding in labor costs brings the total to between $5,000 and $20,000.

What does Lowes charge to install laminate flooring? ›

Lowes Laminate Flooring Installation Cost

On average, Lowe's charges between $1 and $3 per square foot to install the flooring. Hence, the total costs of laminate flooring range between $1.99 and $9. If you have a 500-square-foot area that needs new laminate floors, you'll pay $995-$4,500.

What is the labor cost to install vinyl plank flooring? ›

Vinyl Plank Installation Cost

Materials: $2-3 PER SQ. FT. Labor: $2-3 PER SQ. FT.

How much should I charge to install laminate flooring? ›

Average Total Project Cost: $3.80 - $4.80 per sq. ft. Installation: $2.00 - $3.00 per sq. ft. Materials: $1.50 per sq. ft.

How much should I over order for flooring? ›

Floor manufacturers typically recommend that you buy more flooring material than is apparently necessary—at least, based on the space to be floored. Sometimes, that number ranges as high as 20-percent. So, a site that is 200 square feet may require as much as 240 square feet of flooring.

Should plywood subfloor be nailed or screwed? ›

Screws are preferred over nails for subfloor and underlayment installations as they provide strong and tight connections that help prevent the floor from squeaking. Before starting your next subfloor or underlayment installation, make sure you have the right subfloor screw gun for the job.

How thick should plywood be over subfloor? ›

The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch. There are several factors that determine what subfloor thickness is optimal for added benefits like insulation.

How much does it cost to install floor joists? ›

The long beams that provide the main structural support for the floor can cost $200 to $500 per room or $10 to $67 per square foot to repair. A full replacement costs $5,000 to $20,000. If you're only repairing individual joists, expect to pay $100 to $300 per joist.

How thick should my wood flooring be? ›

Typically, solid hardwood flooring is between 5/16 and ¾ inches thick. Those are pretty standard thicknesses that serve most needs.

How do you calculate cost per square foot? ›

As a homeowner, you can calculate your home's price per square foot by taking the purchase price of the home and dividing it by the square footage of the home. If you purchase a home with 1,500 square feet for the same price, the cost per square foot would be $166.67.

How much flooring do I need for a 10x10 room? ›

How many square feet is a 10x10 room? The square footage of a room 10 feet wide by 10 feet long is 100 square feet. Find the square footage by multiplying the width (10 ft) by the length (10 ft).

How much flooring can you install in a day? ›

On average, a two-person crew can lay 800 to 1,000 square feet of flooring per day. Depending on the size of the planks and size of the room, the project can take one to three days to complete.

How long does it take Home Depot to install flooring? ›

We set up your installation appointment within 24-48 hours of your purchase. Our local, licensed installers take care of everything to get your new flooring installed. Most flooring installations are completed in 1 day.

How much is 200 square feet of wood flooring? ›

According to remodeling site Fixr.com, the national average cost to install hardwood floors ranges from $2,800 to $6,400 for a 200 square-foot room. That's at the cost of between $14 and $32 per square foot of hardwood flooring.

Is carpet cheaper than hardwood? ›

Most carpet is considerably less expensive than most hardwood materials. And although carpeting does need to be replaced every few years, perfectly acceptable carpeting may be available for less than $1 per square foot. Costs can also run as high as $20 per square foot for the highest quality wool carpets.

How long does it take to install hardwood floors? ›

Hardwood Flooring Installation

On average it takes 1-3 days to install hardwood floor. Typically, a 2-person crew of installers can lay 750 to 1,000 square feet of flooring per day, with the average size of a job being 1,000 to 1,500 square feet.

How many ft is a sq ft? ›

A square foot is a measurement of area. It's defined as the area inside a square that measures one foot per side. Area is equal to length multiplied by width. So, one square foot is equal to an area that's one foot long by one foot wide.

How can I save money on hardwood floors? ›

Flooring Cost: 6 Ways to Save Money On Your Flooring Installation
  1. Know Your Flooring Cost Options and Your Budget. ...
  2. Consider Grain and Grade. ...
  3. Decide Between Solid, Engineered, and Laminate. ...
  4. Refinish Your Hardwood Floors. ...
  5. Buy Flooring Online. ...
  6. Choose Off-Peak Season Installations. ...
  7. Get the Flooring You Have Always Wanted.
Mar 30, 2022

How can I save money on flooring? ›

5 Ways to Save Money on New Flooring
  1. Know Your Objective. The biggest mistake that people make when it comes to buying floor covering is choosing the wrong product for their lifestyle. ...
  2. Buy In-Stock Inventory. ...
  3. Install It Yourself. ...
  4. Use a Remnant. ...
  5. Ask For a Discount.

What is the cheapest flooring I can install myself? ›

If you're looking to save money, sheet vinyl is an especially great option because it's generally easy enough for most homeowners to install on their own, so it's possible to skip the cost of installation.

Do you have to remove all furniture to replace flooring? ›

Installing floors requires moving furniture out of the room (and, if you ask someone who's done it before, possibly taking a short vacation). Obviously, if you're ripping out old carpet and replacing it with new, you're going to need to clear the space.

How long should wood floor sit in house before installing? ›

It should be cross stacked and spaced to encourage air circulation around the boards. Most manufacturers recommend materials acclimate for a minimum of three days with no maximum suggested.

How long after polyurethane can you walk on floors? ›

Thus, it's best to wait until all coats have been applied and dried before walking through the room. After that final coat, your floors should be off-limits for 24 hours. This is the only way to avoid any damage.

Should I remove old hardwood before installing vinyl plank? ›

Luxury vinyl planks have an incredibly realistic wood look, and vinyl flooring care and maintenance is a breeze. Here's something even better. If you've been graced with authentic hardwood flooring, it isn't even necessary for you to remove it before installing LVP!

What is cheaper carpet or vinyl plank flooring? ›

Carpet is a more expensive product than luxury vinyl flooring when factoring in cost of installation and upkeep. Compared to carpet, vinyl flooring is much easier to clean/disinfect/maintain/replace especially versus broadloom carpet.

How long does it take to install 500 square feet of vinyl plank flooring? ›

Vinyl flooring installation typically takes between 1-2 days to complete.

What color hardwood floor is best for resale? ›

Dark hardwood flooring is in style. It makes your home easier to sell and also boosts your home's resale value. Shows off the furniture in the room. Dark hardwood floors have a way of contrasting with lighter colored furnishings.

Does Lowes move furniture when installing flooring? ›

Carpet and pad purchase of $499 or more required. Purchase must include carpet pad. Includes: Basic install & furniture moves, tack strip & transitions, installation on stairs, delivery of carpet & pad, and removal, haul away & disposal of old carpet & pad.

Which is better laminate or vinyl plank? ›

Compared to laminate, vinyl flooring is a clear winner when considering moisture exposure. Vinyl flooring is made entirely from plastic which gives it superior moisture resistance. Even extended exposure to splashes and spills won't damage its surface.

How much does it cost to put vinyl flooring in a 12x12 room? ›

You can expect to pay an average of $1 to $3 per square foot for a vinyl flooring installation. Typically, vinyl sheet flooring is the more affordable option at $1 to $2 per square foot. Vinyl planks are only a bit more expensive at just $2 to $3 per square foot.

How much does it cost to install 350 square feet of vinyl plank flooring? ›

By Room Size
Floor Size in Square FeetAverage Cost
200$500 – $2,600
250$625 – $3,300
300$750 – $3,900
350$850 – $4,600
2 more rows
May 15, 2023

How much is labor to remove carpet and install vinyl plank flooring? ›

On average, you can expect to pay around $5 per square foot. This will include removal of the old floor, subfloor preparation and installation of the new floor. For high-quality professional services, it may cost $8 per square foot.

How much should I charge for labor to install flooring? ›

Labor Cost for Floor Installation

Typically, professional flooring installation rates vary from $0.60 to $4 per square foot. However, this rate does not include materials or extra work like removing old flooring or moving furniture before starting.

How long does it take professionals to install laminate flooring? ›

Laminate installation is much like putting together a large puzzle and should take no more than one day for almost any room.

How much does it cost to install 250 square feet of laminate flooring? ›

The range is narrower, $4.50 to $7.50 per square foot, for the most popular brands and styles of laminate flooring, or $4,500 to $7,500 for 1,000 total. Total average cost for: 250 square feet installed: $1,300 to $1,900.

What is the rule of 3 flooring? ›

How Many Different Types of Flooring Should Be In A House? The flooring “Rule of Three” states that from any point in the home, you should see three different types of flooring, or less.

Does the 60-30-10 rule include flooring? ›

A quick 60-30-10 rule example would be the following: Your room has all white walls and a white sectional sofa (60 percent), neutral flooring, side tables, and upholstered side chairs (30 percent), and pops of one color around the room using toss pillows, artwork, and other small items (10 percent).

How do I estimate flooring installation? ›

To do so, use a tape measure to determine the room's length and width. Then multiply the length by the width to get your square footage. For instance, if the room is 12 feet wide and 12 feet long, you will need enough flooring for 144 square feet (12×12=144).

How much does it cost to install vinyl floors for $1 200 sq ft? ›

Cost by Square Footage
Square FootageStandard Vinyl PlankLuxury Vinyl Plank
2 more rows
Apr 11, 2023

How much does Lowes charge for floor installation? ›

On average, you'll need to pay between $2 and $30 per square foot for Lowes flooring installation, including material and labor costs.

How much should I charge for labor to install vinyl plank flooring? ›

Vinyl Plank Installation Cost

Materials: $2-3 PER SQ. FT. Labor: $2-3 PER SQ. FT.

What is the labor cost to install luxury vinyl plank flooring? ›

Luxury Vinyl Plank Flooring

Luxury vinyl plank (LVP) flooring costs $2 to $5 per square foot on average for the materials and $4 to $13 per square foot with labor.

What time of year is best to install wood floors? ›

Moisture in Spring and Summer

Fall is a perfect season for hardwood flooring installation because the cool, crisp weather exposes your hardwood flooring to less moisture.

How long do you have to stay off hardwood floors after installation? ›

We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on. Allow 48 hours before setting furniture and returning pets. Carpets and area rugs can be placed after 1 full week.


Top Articles
Latest Posts
Article information

Author: Jamar Nader

Last Updated: 11/24/2023

Views: 6610

Rating: 4.4 / 5 (75 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Jamar Nader

Birthday: 1995-02-28

Address: Apt. 536 6162 Reichel Greens, Port Zackaryside, CT 22682-9804

Phone: +9958384818317

Job: IT Representative

Hobby: Scrapbooking, Hiking, Hunting, Kite flying, Blacksmithing, Video gaming, Foraging

Introduction: My name is Jamar Nader, I am a fine, shiny, colorful, bright, nice, perfect, curious person who loves writing and wants to share my knowledge and understanding with you.